dataFEED edgeGate - Quick Startup Guide
14
Copyright 2017 Softing Industrial Automation GmbH
3
Configuration and login
3.1
IP address information
The default IP address for the Ethernet interface in the Machine Floor LAN is
192.168.1.111 (see device label).
The IP address of the web server in the common LAN is configured per default via
DHCP. Depending on the configuration of your local DHCP- and DNS-servers it is
possible to reach the device by this host name in your network.
The dataFEED edgeGate supports the network connection protocol UPnP (
Universal
Plug And Play)
for Windows 10. MAC, Linux und Android use Avahi/Zeroconf, the
Zero
Configuration
network implementation protocol which identifies the gateway as an
HTTPs server.
3.2
IP connection to web server
Your network has a DHCP and DNS server
Your network does not have a DHCP and
DNS server
1. Connect the upper Ethernet socket (
IT
) to
your network.
2. Read the last 4 digits/letters of the
dataFEED edgeGate serial number (in the
lower left part of the label).
The host name of the device is
edgegate
followed by the last 4 digits/letters of the
serial number. For example, if the serial
number is 123456789ab, the host name
is
edgegate89ab
.
1. Connect the lower Ethernet socket
(
MACHINE
) directly to a laptop.
2. Set the laptop IP address to
192.168.1.1/24.
