C A B L E TES T
35
itnetworks.softing.com/XG
Figure 35
–
Microscope test of a connector end face
•
If the microscope is connected via USB and a live image of the microscope will
appear on the screen. Insert the end of a fiber optic cable into the microscope
until a clear image of the ferrule is displayed.
•
On the right side of the screen you can influence the
Magnification
of the
image and take a snapshot by pressing the
Freeze
button. Use the
Test
button
to start a pass/fail evaluation of the connector end face.
•
It is necessary that the focus bar display on the left side is above 50%,
otherwise an error message will appear. By turning the focus wheel on the
microscope, you change the focus.