SoftBank 708SC, User Manual

Page: 314 / 441

17-8
Receiving &
Sending Message
s
17
Procedures
Mails should be created in the flow as shown below.
Items other than
Destination
should be entered as
required.
Automatic Change of Message Type
When message creation is started, the message type is
set to SMS; it automatically changes to S! Mail when
one of the following occurs:
• Entering mail address as a destination
• Entering a subject
• Entering characters exceeding the number of
characters that can be sent by SMS
• Inserting files on Slide Show page
• Attaching or inserting a file
• Changing the address type to
Cc
or
Bcc
When the message is modified to allow it to be sent as
SMS, for example, by deleting an attached or inserted
file or a subject, the message type automatically
changes to SMS.
Depending on message creation conditions, it may not
automatically change type. If the mail type is not
changed automatically, change it manually (
P.17-12).
Creating S! Mail
Creating SMS
Enter an address ( P.17-8)
Enter message text ( P.17-11)
Enter a subject ( P.17-11)
Attach/Insert files
( P.17-15, 17-18)
Set any sending options ( P.17-12)
Send the message ( P.17-12)
Tip
• To set sending options beforehand ( P.20-2, 20-5)