SoftBank 101SH, User Manual

Page: 17 / 118

15
Getting Started
SoftBank 101SH
USB Charge
Connect handset to a PC via Micro USB Cable.
・Power on handset and PC first.
・To use Fast transfer mode, install USB Cable driver on the
PC beforehand.
・Battery may not charge or charge slowly depending on PC
status/environment. Battery may not charge if SD Card is
not inserted.
Open Port Cover and insert Micro USB Cable into External
Connector Port
Insert Micro USB Cable into PC USB port
Notification Lamp illuminates while charging.
・Notification Lamp goes out when battery is full. Remove
Micro USB Cable and close Port Cover.
Charging Precautions
Handling Cords
Do not pull, bend, or twist cord.
Important USB Charge Usage Note
Handset may power on automatically when connected to a
PC via Micro USB Cable; avoid connection aboard aircraft or
in hospitals, etc. where handset use is prohibited.
Handset Power On/Off
Power On
With Slider open, Long Press until SoftBank logo
appears
After Power On Graphics, waterproofing/dustproofing
guidance appears.
OK
Initial setup menu opens.
・If handset is set to skip setup menu at Power on, Standby
appears.