All rights reserved
Shenzhen SOFARSOLAR Co ., Ltd.
C
Document Version 2.0(2016.03.29)
49
All rights reserved
Shenzhen SOFARSOLAR Co ., Ltd.
C
Document Version 2.0(2016.03.29)
50
User manual
User manual
Operation
interface
Operation
interface
Sunny Horse Series
(
10K~20KTL)
Sunny Horse Series
(
10K~20KTL)
4.
Set Country Code
Users press “Back” button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter “4.Set Country Code” by pressing “Up” button Or “Down” button,
press “OK” button and enter “Input Password” Setting interface. If it's shown "set disable" on
the screen, then you can NOT choose the operating country, you should enable country
setting through "7. Enable Set Country" interface. If it's shown "set Country code?" on the
screen, then press Confirm button to start country setting. "Success" will be shown on the
screen after a successful country setting.
Table 6-1 country code setting
Germany VDE
AR-N4105
Denmark
Italy CEI0-21
Australia
Spain RD1699
Turkey
Greece Continent
00
01
02
03
04
05
06
Netherland
07
Belgium
UK-G59
08
09
China
France
Poland
Germany BDEW
10
11
12
13
Germany VDE
0126
14
Italy CEI0-16
15
UK-G83
Greece island
EU EN50438
IEC EN61727
16
17
18
19
Korea
20
21
Sweden
Europe General
Customer
VDE
0126
22
23
Code
Countr y
Code
Countr y
Code
Countr y
5
.
Remote Control
6
.
Relay Command
Users press “Back” button to enter “1.Enter Setting” interface, Press OK button to enter
main setting interface.Enter “5. Remote Control” by pressing “Up” button or “Down” button.
Press “OK” button and enter Remote Control Switch On &Off interface. Choose “1.Enable”or
“2.Disable” by pressing “Up” button or “Down” button, press “OK” button, then
communication board start to transmit control signals to control board. “success” is displayed
after setting success ; otherwise it will show “fail”.
“
”
Users press “Back” button to enter “1.Enter Setting” interface, Press ”OK“ button to enter
main setting interface.
Enter “6. Relay Command” by pressing “Up” button or”Down“button, press “OK ” button and
enter “Relay Command setting “interface. Choose corresponded setting items by pressing
“Up” button or “Down” button, then press “OK” button. “success” or “fail” is displayed after
setting.
6
.
Relay Command
1. Production
2. Alarm
3. Config Alarm
4. Relay Disable
Relay Command Definition:
the relay switches whenever a connection to (and therefore a disconnection from)
the grid occurs.
If the relay contractor is in normally open (close) mode, the contact will stay open
(or closed) until the inverter is connected to the grid; once the inverter con-nects to
the grid and starts to export power, the relay switches state and therefore closes (or
opens).
When the inverter disconnects from the grid, the relay contact returns to its
position of rest, namely open (or closed).
Production
Alarm
Config Alarm
The relay switches whenever there is an alarm on the inverter (Error). No
switching occurs when there is a Warning.
If the relay contractor is in normally open(close)mode, the contact will stay open
(or closed) until the inverter reports an error; once the inverter reports an error, the
relay switches state and therefore closes (or opens).The contact remains switched
from its rest condition until normal opera-tion is restored.
the relay switches whenever there is an alarm (Error) or a Warning, which have
been previously selected by the user through the PC. the contact will stay open (or
closed) until the inverter reports an error or a warning out of those selected from
the menu; once the inverter displays an error or a warning out of those selected, the
relay switches state and therefore closes (or opens) the contact. The relay remains
switched from its rest condition until the alarm or warning has disappeared.
Relay Disable
Control function is forbidden
