21
Standard print images, factory setting
Print images can be assigned to the print-triggering keys using the service software. The following print
image is already stored and assigned in the factory setting, so it can be printed out. This standard print
image is an example that shows which parameters are available.
Print-triggering conditions
The service software is used to assign print images to print triggering conditions.
The following conditions can be assigned to print images:
• Print key (ENTER key)
• Auto imprint/data record once immediately
• Auto imprint/data record once after weight change at stability
• Auto printing/data record after weight change at stability
• Autoprint/data record after weight change at stability above the empty signal
• Autoprint/data record after weight change at stability above the empty signal if the empty signal
was active before.
• Send current
• ENTER/Capture key when entering ORG A
• ENTER/Capture key when entering ORG B
• ENTER/Capture key when entering ORG C
• ENTER/Capture key when entering ORG D
• Key sequence INFO, F and ENTER (depending on setting)
• ENTER/Capture key for manual input
• Print alibi memory
5.14 Assignment of the F key
You can use the F key to call the functions. This takes on different functions depending on the
occupancy. The current function is selected in the setting mode.
You can enter the setting mode by simultaneously pressing the ENTER and then the
F key.
In the setting mode, you can find the assignment options for the F key via Program Settings > Weighing
+ Taring > F key. Select the desired function with the F or TARE key and confirm with the ENTER key.
The following functions are available:
Intermediate tare
Dialysis function
Hold fashion
Second Unit
BMI function
Exit the setting mode by pressing the ORG key.
Date
Time
Scale no.
Gross
Tare
FUNC
TIONS
5
5. Functions
Summary of Contents for 7811 Series
Page 1: ...1 7811 Bed Scale Operating Instructions www soehnle professional com ...
Page 30: ...30 Notes ...
Page 31: ...31 Notes ...
