44
Periodic cleaning
Once every few months or if the dispenser was not used during the preceding 72 hours, we
recommend to rinse and sanitize the internal tanks and piping of the dispenser.
Touch the Technical Screen icon
in the Settings screen.
Touch the cleaning icon
on the Technical
Screen to activate the dispenser's rinsing
program. Follow the instructions displayed on
the screen.
Preparing for the cleaning process
Place a 3 liter container under the dispenser
spout.
Touch the NEXT screen button to begin the
rinsing.
The filling and rinsing process of the cold, hot
and soda water reservoirs is automatic and
lasts for approximately 10 minutes. Wait for
the process to complete.
During the rinsing process, water will be
dispensed into the external container. When
the container is almost full, touch the pause
icon
to enable you to empty the reservoir
in time. Return the empty container and touch
the Continue icon
to complete the
process.
If the dispenser's supply water source was selected during the initial installation stage as the built-
in reservoir of the dispenser, you will be prompted to refill the water supply reservoir once it was
emptied during the rinsing process. Fill the water supply reservoir. You may be asked to fill the
dispenser reservoirs more than once.
