14
CAUTION
The cleaning procedure cleanses the dispenser's internal system and the new filter by rinsing and
washing away all possible foreign matter or residues.
Preparing the SODAX X1-X10 for the
cleaning procedure
Place a container (at least 3 liter capacity)
under the dispenser's spout.
Touch the NEXT screen button.
Note:
Touching NEXT will start the cleaning process
of cold water tank. This water will be used to
flush the entire system.
The process will last several minutes.
Please note:
The cleaning process may be stopped at any
time by touching the PAUSE icon
.
To continue the process, touch the
CONTINUE icon
.
If the built in reservoir was chosen as the
water supply source, a warning screen may
appear (from time to time) requesting you to
refill the reservoir.
The blue progress bar indicates the progress
of the cleaning process.
At the end of the cleaning process the next
screen will appear with the prompt:
"Did water flow out from the dispensing
spout during washing?"
If yes, touch the YES screen button to
continue.
If no, touch the NO screen button to go back
and choose the correct water source.
