background image

  

                                  

 

                          

 

 

 

 

-interrupt the operation e proceed in removing the material, in order to avoid forming accumulation 
of unstable material in the working area. 
 
 
 
 
 

USAGE NOT PERMITTED 
 

All  the  operations  listed  below  can  mean  serious  damages  to  the  equipment and to the safety of 
the operator. Therefore these operations are totally prohibited, in case of contrary the warrantee on 
the equipment and the responsibility of the manufacturer will decline. 
-The  equipment  must  not  be  used  on  a  different  excavator  as  the  one  suggested,  and  must  be 
verified before the usage. 
-The equipment nust not be used for operations or materials which are not the ones indicated. 
-The equipment must not be used by personeel which is not properly prepared. 
-The  equipment  must  not  be  used  in  worksites  different  from  those  indicated,  referred  to  the 
temperature and humitidy. 
-The equipment must not be used in dangerous worksites, in presence of gas, vapor, aggressive 
climate, corrosive, esplosive, danger of fire, due to the over heating from the working procedures. 
-The equipment must not be used in case of unstable or leaning ground. 
-The  equipment  must  not  be  used  to  crush  water  pipelines,  pressure  lines,  gas  lines,  electrical 
lines, before having verified that there isn’t any electricity or dangerous residuals. 
-Crushing  operations  must  not  be  done  near  dangerous  elements  (tanks  with  pressure,  pressure 
lines,  high  tension  electrical  llines,  in  case  the  safety  distances  do  not  guarantee  that  these 
elements can be damaged by falling parts due to the crushing operation. 
-The equipment must not be used to compact, tear or pull materials. 
-Do  not  rotate  the  crusher  with  material  in  between  the  jaws,  the  rotation  allows  the  operator  to 
place the equipment in the ideal position for the demolition process.  
-It is forbidden to use the equipment to crush material that can slide and cause danger such as:  
- round materials,   
- on either end of a beam,   
-This material or similar pieces can also cause damages to the jaws.  
-It is forbidden to use the equipment to lift or transport people. 
-It is forbidden to move above people with material between the jaws. 
-During the demolition do not move the excavator. 
-Make  sure  that  the  excavator  is  always  on  solid  ground  and  not  tilting  in  order  to  be  stable.  In 
case  of  an  unstable  situation  of  the  excavator  due  to  the  weight  of  the  material  being  crushed, 
open the jaws immediately and free the material. 
-Do not use the equipment or move in case the operator does not have a full view of the working 
field. 

-

It is forbidden to bring and maintain the equipment at the maximum pressure trying to demolish or 

cut a concrete structure positioned on the bottom of the jaws, or between the blades. In case such 
situation  accruse,  imeediately  remove  the  pressure  and  appraise  whether  you  can  proceed  with 
the demilition in gradual way or whether the equipment used is understaffed for the type of usage 
(application) 

 

EQUIPMENT USE

13

Page

of 29

7

Summary of Contents for PDO 100






























Reviews: