socomec DIRIS Digiware M-50 Instruction Manual Download Page 34

Page: 34 / 60

DIRIS Digiware M-50 & M-70 - 548751B - SOCOMEC

11. CONFIGURATION VIA EASY CONFIG SYSTEM

The EasyConfig System software can be downloaded from the Socomec website at the following link:

https://www.socomec.com/easy-config-software_en.html

The Configuration of the DIRIS Digiware M-50/M-70 gateway and downstream Socomec devices can be done from the
EasyConfig System software, by connecting a computer to the M-50/M-70 gateway either via USB or via Ethernet.

11.1. USB connection mode

DIRIS Digiware

M-xx

DIRIS B

RS485

Digiware

Bus

Digiware

system

EasyConﬁg System

ETH

ETH

ETH

DIG

IWARE

24 V

20 W m

SUPPL

RS485

ADDR.

ALARM

COM

DIRIS M-

USB

> Open EasyConfig System.

> Connect a USB cable between the DIRIS Digiware M-50/M-70 gateway and a computer.

> Log in as User or Admin. Admin default password is “Admin”.

> Click on “New Configuration”, enter a name and icon.

> Click on the newly created configuration.

> Click on “USB mode” on the right top corner to connect to the M-70/M-50 gateway and access

configuration menus.

> Click on the “Binocular” icon on the left side bar.

> Under the “Organisation” part, select the M-70/M-50 gateway.

> Click on “Dashboard” to visualise general information about the gateway.

> Click on “Auto-discovery” (1):

Summary of Contents for DIRIS Digiware M-50




























































Search results

Summary of Contents for DIRIS Digiware M-50

Reviews:

Related manuals for DIRIS Digiware M-50

Brands by name

Popular brands

socomec DIRIS Digiware M-50, Instruction Manual

Search results

Summary of Contents for DIRIS Digiware M-50

Reviews:

Related manuals for DIRIS Digiware M-50

Brands by name

Popular brands