BASIC MODE
Android:
Connect Android Device in Basic Mode
In this mode the reader functions and communicates similar to a key-
board. Therefore, the reader will work with Notes, and any other
application that support an active cursor.
1. Power on the reader. Make sure the reader is
discoverable (unpaired) The Blue light blinks fast.
2. Settings | Bluetooth.
3. Make sure the device has Bluetooth “On” and read for devices.
4.
In the list of found devices, select D600 [xxxxxx]. Tap Pair.
5. The reader will connect to the Android device.
6. The reader will beep once after it has connected.
Note: The characters in bracket are the last 6 characters of the Bluetooth
address.
*If you have trouble connecting or pairing with host device, turn host
device’s Bluetooh off/on, and/or perform Factory Reset to the reader
(see page 13).
Now you are ready to read RFIDs!
17
