If you have purchased the Socket Mobile Charging Stand, the D600 can
both charge and read stationary in Auto Mode.
1. Pair and connect the D600 to your device prior to placing the reader in
Auto Mode. The reader is not discoverable when in Auto Mode and in
the Stand. This facilitates a fast
connection to the current connected device when powered on (for ex
-
ample the start of the new business day).
2. The Trigger button must be pressed to disable Presentation Mode (and
enable Mobile Mode) after the reader is removed from the Stand.
3.
The reader will not turn off when its in Presentation Mode and in the
Stand under AC Power.
4.
To avoid excessive power drain, the reader should not be left out of
the Stand in Auto Mode. Either press the Trigger button or Power off the
reader.
Auto Mode (In the Stand)
Action
Behavior
Notification
Beep Pattern
Light Activity
Vibrate
Place Reader in
the Stand
Reader switches to
Presentation Mode
High-high tone confirms
proper seating*
Battery Status
Light is Disabled
None
Place an RFID tag
in the Reader’s
Field of View
Initiate Read
operation
1 Beep when Data
successfully reads
Green Light blinks
(while reading)
None
Mobile Mode (Not in the Stand)
Action
Behavior
Notification
Beep Pattern
Light Activity
Vibrate
Remove the
Reader from the
Stand and press
the Trigger button
Reader switches
to Mobile Mode
None
Battery Status
Light is Enabled
Enabled
Press the Trigger
button
Initiate Read
operation
1 Beep when Data
successfully read
Green Light blinks
(while reading)
Vibrate when Data
successfully read
14
AUTO MODE (CHARGING STAND)