Socket VMZV7 User Manual Download

Page: 55 / 59

3-31

After the backup,prompt: Are you sure to program?(Y/N) Press <Y> to start

to program the new BIOS information into the flash ROM. When the pro-

gramming is finished.You may press <F1> to reset the PC or <F10> to Exit

the AWDFLASH.

WARNING!!!

If you encounter problems while updating the new BIOS, DO NOT turn off

your system since this might prevent your system from booting up. Just repeat

the process, and if the problem still persists, update the original BIOS file you

saved to disk above. If the Flash Memory Writer utility was not able to

successfully update a complete BIOS file, your system may not be able to

boot up. If this happens, your system will need service.

NOTE!!!

The previous screen displays are provided as example only and may not

reflect the screen contents displayed on your system.

CMOS Setup Utility

Summary of Contents for VMZV7




























































Search results

Summary of Contents for VMZV7

Reviews:

Related manuals for VMZV7

Brands by name

Popular brands

Socket VMZV7, User Manual

Search results

Summary of Contents for VMZV7

Reviews:

Related manuals for VMZV7

Brands by name

Popular brands