Parameter Menus
8-41
73
Code 11
Enable/Disable Code 11
Parameter # 0x0A
To enable or disable Code 11, scan the appropriate bar code below.
Enable Code 11
(0x01)
*
Disable Code 11
(0x00)
Set Lengths for Code 11
Parameter # L1 = 0x1C, L2 = 0x1D
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code has. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range.
•
One Discrete Length
- Select this option to decode only Code 11 symbols of a certain length. To select the length,
use the numeric bar codes on page 83. For example, to decode only Code 11 symbols with 14 characters, scan
Code 11 - One Discrete Length
, then scan
1
followed by
4
. To correct an error or to change the selection,
scan the Cancel bar code on page 85.
.
•
Two Discrete Lengths
- Select this option to decode only Code 11 symbols containing either of two selected
lengths. Select lengths using the numeric bar codes beginning on page 83. . For example, to only decode Code 11
symbols with either 2 or 14 characters, select
Code 11 - Two Discrete Lengths
, then scan
0
,
2
,
1
, and then
4
.
To correct an error or to change the selection, scan the Cancel bar code on page 85.
.
•
Length Within Range
- Select this option to decode a Code 11 symbol with a specific length range. Select
lengths using numeric barcodes on page 83. For example, to decode Code 11 symbols with 4 to 12
characters, first scan
Code 11 - Length Within Range
. Then scan
0, 4, 1, and 2
(single digit numbers must
start with a leading zero). To correct an error or change the selection, scan the Cancel barcode on page 85.
•
Any Length
- Scan this option to decode Code 11 symbols containing any number of characters within the scanner
capability.
