6.
In the next screen, enter the dial-up number exactly how it should be
dialed from your current location. You can enter the number without
any spaces or dashes.
8.
In the next screen, enter the
User name
and
Password
. Tap
Advanced
.
Note: If you plan to use
the connection in
different area codes, tap
use dialing rules
to set
up the correct dialing
locations. Refer to your
Pocket PC 2003
documentation for
instructions.
9.
In the
General
screen, check the
Wait for dial tone before dialing
box.
The baud rate value does not matter, because the modem’s baud
rate is internally configured to optimize data compression and
decompression speeds.
If you DO NOT need to enter any IP addresses, tap
ok
.
If you DO need to enter IP addresses, tap on the
TCP/IP
and
Servers
tabs
to enter any necessary IP addresses. Tap
ok
.
10.
In the last screen, tap
Finish
.
APPENDIX D: MANUAL CONNECTION SETUP | 31