9 |
S
OCKET
D
IALER
This chapter explains how to assign a dialing prefix and use the
Socket Dialer to dial a number directly from your Contacts list.
The Socket Dialer makes it quick and easy to perform dial-up
networking.
IMPORTANT!
If you have not done so already, be sure to run the Dialer Installer from
the Socket installation CD. To install the software: In the Socket
Connection Kit Setup Center, on the Installation page, scroll down and
click on the Dialer Installer link.
Note: The Socket Dialer works only with Windows 2003/2003SE and has
been verified to work with Nokia and Ericsson phones and is known not to
work with the Motorola 270c, NTT Docomo Paldio 633S or Sony au C413S
phone. Results may vary with other phones that are not officially supported
by the Socket Connection Kit.
Assign a Dialing Prefix
If you have not already assigned a dialing prefix during the install process,
you can do so by following these steps:
1.
Go to
Start | Settings | System
. Tap on
Socket Dialer
.
2.
Select the appropriate
Dialing Prefix
, then tap
ok
.
62
Summary of Contents for CompactFlash Connection Kit
Page 85: ...5 2007 Printed in U S A...
