General Device Settings
Note: If you use the Get Connected! Wizard to connect to a phone, then this
step is not necessary.
In the
My Bluetooth Device
screen, you can modify the
Friendly Name
as
well as connection settings.
If you want to initiate a connection from your mobile computer (e.g., for
most dial-up networking and printing applications):
•
Discoverable
: You do not need to enable this.
•
Connectable
: You do not need to enable this.
If you want to accept a connection from another
Bluetooth
enabled device
(e.g., to connect to a Socket Cordless Serial Adapter set to Initiator mode):
•
Discoverable
: Check this box.
•
Connectable
: Check this box.
Note: If you enable Discoverable mode, it does not shut off by itself. To
conserve power, manually disable this feature when not in use.
Use Authentication
: Check this box if you want to require a passkey to
connect with another
Bluetooth
enabled device. If either or both devices use
authentication, you must enter a passkey to connect.
Use Encryption
: Check this box to connect to
Bluetooth
enabled LAN
access points that use WEP encryption.
IMPORTANT! After you finish configuring all of your settings, tap ok to
exit the Device Manager and make the settings take effect!
18
Summary of Contents for CompactFlash Connection Kit
Page 85: ...5 2007 Printed in U S A...
