6
2 | Setup for Windows Mobile
This chapter explains how to install and use the Cordless Hand Scanner
with a
Bluetooth
enabled Pocket PC 2003.
Setup Summary
STEP 1: Charge the scanner.
STEP 2: Uninstall other scanning software.
STEP 3: Install the software.
STEP 4: Connect scanner to Pocket PC via
Bluetooth
.
STEP 5: Assign a trigger button.
STEP 6: Scan data into your application.
OPTIONAL:
•
Select symbologies.
•
Configure prefix/suffixes.
•
Run Scan Demo application.
•
Configure sounds.
•
Use SocketScan Trigger.
STEP 1: Charge the scanner
Use the included AC adapter to charge the Cordless Hand Scanner. The
scanner’s NiMH batteries must be charged for at least 4 hours before the
first use. The Battery Status LED will emit a solid red light while charging,
and turn off when the batteries are fully charged.
WARNING:
Do not use the scanner when it is being charged, or the battery may have
problems achieving a full charge in the future.
Do not attempt to charge alkaline batteries — this may cause alkaline
batteries to leak and damage the CHS.
