8.
If your device warns that the software comes from an unknown publisher, tap
Yes
to continue installation.
9.
When installation is complete, remove the device from the cradle. Soft reset the
device by pressing the reset button.
IMPORTANT! Soft reset your device, or some icons will not appear properly.
STEP
3:
A
SSIGN A
T
RIGGER
B
UTTON
Refer to your PDA manual for complete instructions.
Note: Alternatively, you can use the SocketScan Trigger software to set up a soft
trigger on the screen. See Chapter 3.
1.
Tap
Start
| Settings | Buttons
.
2.
From the
Button
list, tap to select a button to trigger the SD Scan Card. In the
drop-down menu, select
SocketScan
. When done, tap
ok
.
STEP
4:
S
TART
S
OCKET
S
CAN
1.
Tap
Start | Programs | SocketScan
.
Note: Alternatively, you can press the trigger button to start the program
.
2.
Make sure the “Scan Card detected” icon appears at the bottom of the Today
screen.
Icon Meaning
SD Scan Card detected. SocketScan is ready for barcode scanning.
No scanner detected. The scanner is either missing or improperly
inserted.
STEP
5:
I
NSERT THE
SD
S
CAN
C
ARD
1.
Insert the card into your device’s SDIO slot. Make sure the card is positioned
correctly. Do not insert the card upside-down or force the card in too hard.
Be sure to insert the card all the way into the slot.
A
PPENDIX
D:
S
ETUP FOR
W
INDOWS
M
OBILE
(N
ON
S
OMO
) 25