CHAPTER 2: SETUP | 5
STEP 3: Install the Software
Follow these steps for software installation BEFORE inserting the 10/100
Ethernet CF Card:
1. Make an active partnership between the mobile computer and a host PC.
An active partnership exists if data can be transferred between the
mobile computer and the host PC via the mobile computer’s serial/USB
connection cable or cradle.
2. Insert the Socket 10/100 Ethernet Installation Disc into the host PC.
3. Run the SETUP.EXE file on the CD-ROM. Do any of the following:
•
Go to
My Computer
to access your CD drive and run the file.
•
Use Windows Explorer to access your CD drive and run the file.
•
Click
Start
then
Run
on the host PC. Type
X:\SETUP.EXE
(Replace X with your CD drive letter.)
4. Follow the instructions on the host PC screen until setup is done.
Note: After completing setup, your host PC may display the following:
•
An
Application Downloading Complete
screen. Click
OK
.
•
A screen telling you to check your mobile computer screen for extra
installation steps that may be necessary. Click
OK
.
5. Disconnect the mobile computer from the serial/USB cable/cradle.
6. Soft reset the mobile computer. Push the reset button, often on the back.
Important! Be sure to soft reset your mobile computer after software
installation!
Summary of Contents for 10/100 Ethernet CF Card
Page 23: ......
Page 24: ...Printed in U S A...
