4. Maintenance and Service
4.1 Battery Replacement
Ensure the meter is disconnected from all live sources. Remove test leads and
switch the tester off. Lift the tester stand and unscrew the battery cover screws.
Lift the battery cover taking care to retain the screws. Replace the 9V battery
ensuring correct polarity. Secure the battery cover with the two screws.
4.2 Fuse Replacement
Ensure the meter is disconnected from all live sources. Remove test leads and
switch the tester off. Remove the tester rubber over mould. Unscrew the fuse
holder screws and lift the fuse carrier. Replace fuses as required, refit the fuse
carrier and secure with the screws. Fit rubber over mould.
4.2 Trouble Shooting
If required, clean with a damp cloth and mild detergent. Do not use abrasives
or solvents.
With the exception of the batteries and fuses there are no user serviceable
parts.
Contact Socket & See for parts and technical assistance.
Socket & See
Century Road
High Carr Business Park
Newcastle
Staffordshire
ST5 7UG
UK
Tel: +44 (0) 1782 567096
Fax: +44 (0) 1782 567095
Email: [email protected]
Website: www.socketandsee.co.uk
Error
Possible cause
The meter does not function
Check the battery status
No measuring value change
Check correct function is selected
Reading on the display hangs up
Turn the rotary switch to OFF and
switch on again after 3 seconds
Fatal error or undefined reading
Turn the rotary switch to OFF and
switch on again after 3 seconds
