2.2. Initial Setting
This VoIP Phone provides you with rich function and parameters setting. If you have enough knowledge
about network and SIP protocol, it is better for you to understand many parameters. But if you know little
about network and SIP protocol, you can also easily make initial setting according to the following steps to
enjoy rapidly high quality voice and low cost from this VoIP Phone.
Before make initial setting, please check if your corporate IP telephony network can work normally, and you
have finished “connect the phone”.
This VoIP Phone Supports DHCP by default. It will receive an IP address and other network-related settings
(Netmask, IP gateway, DNS server) from the DHCP server. If your network supports DHCP, you can
connect this VoIP Phone directly to the network. If your network doesn’t support DHCP, you need change
this VoIP Phone’s network connection setting. According to the following steps, change this VoIP Phone’s
DHCP network connection setting into PPPoE or static IP which your network supports at present.
2.2.1. PPPoE mode.
1. Prepare your PPPoE account name and password.
2. Press the MENU key, the LCD screen will display “INPUT PASSWORD”.
3. Input the password (default value is 123), and press the ENTER key, the LCD screen will display
“NETWORK”.
4. Press the ENTER key and LCD screen will display “LAN”, press the DOWN key, enter it by the ENTER
key, the LCD screen will display “STATIC NET”. Then press the DOWN key again, enter it by the
ENTER key, the LCD screen will display “USER NAME”.
5. Press the DOWN key, the LCD screen will display “PASSWORD”. Then press the ENTER key, and the
DEL key, input your PPPoE’s password and confirm it by the ENTER Key, the LCD screen will display
the password which you inputted.
6. Press the EXIT key to return to the previous menu, then press the DOWN key, the LCD screen will
display “USER NAME”. Press the ENTER key, and the DEL key, input your PPPoE’s account name,
then press the ENTER key to confirm it, the LCD screen will display the PPPoE’s account name which
you inputted.
7. Press the EXIT key for four times and press the DOWN key, till the LCD screen display “SYSTEM”.
8. Press the ENTER key, the screen display “SAVE”, then press the ENTER key again, the LCD screen will
display “ARE YOU SURE”.
9. Press the ENTER key, the phone will save your setting and the LCD screen will display “SAVING”, then
return to display “SAVE”.
10. Press the EXIT key twice, then press numeric key “3”and hold until the screen display “ARE YOU
SURE”. Press the ENTER key, the screen will display “CHANGING”, which means that the phone is
trying to switch to PPPoE mode. If the icom “PPPoE” on the top of the screen keeps blink, it shows that
the phone is trying to access the PPPoE server., and the IP is still static IP if you press SYSINFO key to
display the current IP; if the icon “PPPoE” is showed without blink, it means that the phone has already
gotten IP from PPPoE server.
2.2.2. Static IP mode:
1. Prepare your phone’s network parameters. They are IP Address of this phone, Subnet Mask, Default
Gateway/ Router and DNS. You can ask your VoIP service provider for those parameters.
2. Press the MENU key, the LCD screen will display “INPUT PASSWORD”.
3. Input password (default is 123), then press the ENTER key, the LCD screen will display” NETWORK”.
4. Press the ENTER key, and the LCD screen will display “LAN”. Press the DOWN key, then the ENTER
key, the LCD screen will display “STATIC NET”.
5. Press the ENTER key, the LCD screen will display “IP”. Press the ENTER key again and then the DEL
key, input your desired IP address for your IP phone and confirmed by pressing the ENTER key, then the
LCD will display the input IP address. When inputting IP with keypad, use “*” instead of “.”.
6. Press the EXIT key to return to previous menu, then press the DOWN key for twice, the LCD screen will
9
Summary of Contents for SNR-VP-6020
Page 1: ...SNR VP 6020 User Manual...
