DiffServ Enable
DiffServ Value
packets will add voice VLAN ID. Other data packets will not use
VLAN
Select it or not to Enable or disable DiffServ
。
Set DiffServ value, the common value is 0x00. 0xb8, which is the
highest priority
Voice 802.1P Priority Specify 802.1P Priority of voice/signal data packet.
Data 802.1P Priority
Set 802.1p of data VLAN. Non-VoIP data(such as http ,telnet ,ping
Voice VLAN ID
Data VLAN ID
Notice:
etc) will use this value to set VLAN patcket.
Set VLAN ID of voice/signal data packet
Set 802.1q of data VLAN ID. Non-VoIP data(such as
http ,telnet ,ping etc) will use this value to set VLAN patcket.
1. If you don’t enable diffServ, phone will not set voice/data packets with different VLAN ID
even if select tag differentitted.
2. If you disable VLAN, system will not add VLAN ID to all packets, regardless of Data/Voice
Diffserv. If you enable diffserv, system will just set the diffserv value to voice/signal packets.
3. VLAN ID Check Enable is on by default. It means system will check VLAN ID strictly; if
packets’ VLAN ID are not same as value system using or has no VLAN, packets will be lost;
if it is off, system might accept packets which VLAN ID are not same as value system using
or has no VLAN.
4.2.4.6. Advance SIP Configuration
In this web page, you can config SIP STUN, Private Server and so on.
STUN:
By STUN server, a phone in private network could know the type of NAT and the NAT mapping IP and
port of SIP. The phone might register itself to SIP server with global IP and port to realize the device both
calling and being called in private network.
27
Summary of Contents for SNR-VP-6020
Page 1: ...SNR VP 6020 User Manual...
