background image

16

Cleaning

Use only mild soap and a damp cloth to clean the pole chain 

saw. Never let any liquid get inside the motor housing and 

NEVER immerse any part of the saw housing in liquid.

Storage

• Ensure that the guide bar cover is in place when storing.
• Do not store the pole chain saw near chemicals, such

as fertilizers or other harsh solvents. Do not expose

the plastic parts of the unit to brake fluids, gasoline,

petroleum-based products, penetrating oils, or the like.

These products are often highly corrosive and may cause

permanent damage, weaken, or destroy the plastic parts

of your pole chain saw.

When not in use, your electric pole chain saw should be

stored indoors in a dry and high or locked-up place, out of

the reach of children.

Model and Serial Numbers 

When contacting the company, reordering parts, or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of your 

new product:

Model #:

Serial #:

S  W   J   8    0   2   E 

Summary of Contents for Sunjoe SWJ802E


















Reviews: