background image

8

Know Your Electric Chain Saw

Read the owner’s manual and safety rules carefully before operating your electric chain saw. Compare the illustration 

 

below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this 

 

manual for future reference.

Technical Data

Rated Voltage .....................................................

120 V ~ 60 Hz

Motor .................................................................. 14 A

No Load Speed

 ..................................................

8000 rpm 

Bar/Chain Length

 ...............................................

18 in. (45.7 cm)

Cutting Thickness Max ................. 17.5 in. (44.5 cm)

 

 

Recommended: 16.5 in. (42 cm)

Oil Tank Capacity

 ..........................

3 fl oz (90 ml)

Chain Speed

 ..................................

47.6 ft/s (14.5 m/s)

Weight ...........................................

9.7 lbs (4.4 kg)

1. 

Appliance cord

2. 

Rear handle

3. 

Oil tank cap

4. 

Front handle

5. 

Safety chain brake lever

6. 

18 in. cutting chain

7. 

Guide bar nose sprocket

8. 

18 in. guide bar

9. 

End cover nut with decorative cap

10. 

Sprocket/chain end cover

11. 

Oil level indicator window

12. 

Trigger switch

13. 

Safety lock button

14. 

Extension cord restraint hook

15. 

Cutting bar sheath

R

R

4

5

13

15

14

6

7

9

10

11

12

8

1

2

3

Summary of Contents for Sunjoe SWJ701E-RM

























Reviews: