7
Technical Data
Motor ............................................................... 600 W brushless
Battery Voltage Max
*
.................................................... 40V D.C.
Battery Capacity ..............................................................5.0 Ah
Battery Runtime Max .............................................
LOW: 31 min
MEDIUM: 29 min
HIGH: 25 min
Charger Input ............................................ 100 –120V AC 60 Hz
Charge Output ..........................................................42V DC 2A
Charge Time Max ........................................................3.5 hours
Removable Bucket Capacity .................................. 5.3 gal (20 l)
High Pressure Hose Length ..................................20.3 ft (6.2 m)
Soap Dispenser Attachement Capacity ..........
8.5 fl oz (250 ml)
Max Water Inlet Pressure ............................................. 0.7 MPa
Max Water Inlet Temperature ..................................104ºF/40ºC
Max Pressure at initial discharge .................................1160 PSI
per CSA internal pressure testing
Rated Pressure under typical load ........................LOW 500 PSI
MEDIUM 650 PSI
HIGH 800 PSI
Max Flow with nozzle open at minimum pressure ......... 1 GPM
Rated Flow under typical load .......................... LOW 0.68 GPM
MEDIUM 0.74 GPM
HIGH 0.79 GPM
Net Weight ...................................................... 23.8 lbs (10.8 kg)
* Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage
under typical load is 36 volts.
Unpacking
Carton Contents
• Water bucket
assembly
• Bucket lid
•
Base unit
•
Trigger gun
•
Spray wand
• Four (4) Quick-Connect nozzles (0º, 15º, 25º, and 40º)
•
Needle clean-out tool
•
Soap dispenser attachment
•
Trigger gun holder
•
High-pressure hose
• Garden hose adapter (female coupler)
• iONMAX iBAT40XR lithium-ion battery featuring exclusive
EcoSharp
®
technology
• iONMAX iCHRG40 lithium-ion battery charger
•
Manual with registration card(s)
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
\not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
m
WARNING!
Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Assembly
1. The washer must be used on a secure and stable surface
in a standing, upright position (Fig. 1).
2. Open the box, take out the bucket lid, bucket and the
base unit (Fig. 2).
Fig. 1
