![SNOWJOE sunjoe iON12TL-CT Operator'S Manual Download Page 9](http://html1.mh-extra.com/html/snowjoe/sunjoe-ion12tl-ct/sunjoe-ion12tl-ct_operators-manual_1310457009.webp)
9
3. Connect the upper handle to the middle handle using
the second set of knobs, bolts and washers. Tighten the
knobs on each side to ensure a secure fit (Fig.
3).
4. Secure the cable inside the cable clips (Fig. 4).
m
WARNING!
Make sure all handle knobs are properly
tightened before using the cordless cultivator.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
m
WARNING!
Charge only the EcoSharp
®
iBAT40 lithium-
ion battery packs, the EcoSharp
®
PRO iBAT40XR lithium-ion
battery packs, or the EcoSharp
®
PRO iBAT40XRP lithium-
ion battery packs in compatible EcoSharp
®
iCHRG40 or
EcoSharp
®
dual port iCHRG40-DPC battery chargers. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the Battery
NOTE: The EcoSharp
®
iBAT40, EcoSharp
®
PRO iBAT40XR,
and EcoSharp
®
PRO iBAT40XRP battery packs do not develop
a "memory" when charged after only a partial discharge.
Therefore, it is not necessary to run down the battery pack
before placing it into the charger.
Fig. 3
Knob + bolt + washers
Middle handle
Lower handle
Upper handle
Fig. 4
Cable
Cable clip
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light Indicators
Lights
Summary of Contents for sunjoe iON12TL-CT
Page 17: ...NOTES 17...
Page 18: ...NOTES 18...