SNOWJOE sunjoe iON12TL-CT Operator'S Manual Download Page 7

7

Know Your Cordless Cultivator

Read the owner’s manual and safety instructions carefully before operating the cordless cultivator. Compare the illustration 

below to the cordless cultivator in order to familiarize yourself with the location of the various controls and adjustments.  

Save this manual for future reference.

1.  ON/OFF trigger
2.  Safety lock button
3.  Upper handle
4.  Upper handle knob and bolt (2)
5.  Cable clip (2)
6.  Middle handle
7.  Lower handle knob and bolt (2)
8.  Battery compartment
9.  Motor housing

10. Gear box
11. Steel blades
12. Wheels
13. Guard

14. Air outlet
15. Lower handle
16. Push lock button
17. Battery indicator
18. Push button for battery indicator
19. 40 V 4.0 Ah EcoSharp

®

 (model 

iBAT40), 40 V 5.0 Ah EcoSharp

®

 

PRO (model iBAT40XR) or 40 V 

6.0 Ah EcoSharp

®

 PRO (model 

iBAT40XRP) lithium-ion battery 

– Sold separately 

20. 40 V EcoSharp

®

 battery charger 

(model iCHRG40) or 40 V 

EcoSharp

®

 dual-port battery 

charger (model iCHRG40-DPC) 

– Sold separately

1

2

3

4

5

6

7

8

11

10

12

13

14

16

17

18

19

20

15

9

Technical Data

Battery Voltage* 

40 V D.C.

Cultivating Width (Max)   

       12 in. (30 cm)

Cultivating Depth (Max)   

        8 in. (20 cm)

Blade   

 

 

        4 steel tilling blades

Motor   

 

 

        650 W Brushless

No Load Speed   

 

        300 rpm

Wheel Adjustment 

 

        3 positions 

Weight ( cultivator alone) 

        22.3 lbs (10.1 kg) 

Weight (with battery installed) 

        24.8 lbs (11.2 kg)

*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage under typical load is 36 volts.

For battery options and specfications, see Optional Accesssories for details. 

Summary of Contents for sunjoe iON12TL-CT





















Reviews: