14
Storage
Air Hose + Adapters Storage
1. When the air compressor is not in use, press the hose into
the storage area on top of the tool (Fig. 16).
2. Adapters provided with the air compressor can be placed
in the storage area located on both sides (Fig. 17).
3. Store the tool and all accessories into the carrying case
(Fig. 18).
Cleaning And Maintenance
m
WARNING!
Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken or destroy plastic which
can result in serious personal injury.
Cleaning
• Keep the ventilation slots of the machine clean to prevent
overheating of the engine.
• Regularly clean the machine housing with a soft cloth,
preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• If the dirt does not come off use a soft cloth moistened with
soapy water.
• Never use solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Maintenance
Our machines have been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper machine care and
regular cleaning.
NOTE: Snow Joe
®
+ Sun Joe
®
will not be held responsible for
any damage or injuries caused by repair of the air compressor
by an unauthorized person or by mishandling of the air
compressor.
Spare parts may be ordered online at snowjoe.com or via
phone by contacting the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Disposal
Should your appliance need replacement after extended
use, do not dispose of it with the household refuse, but in an
environmentally safe way.
Waste produced by electrical machine items should
not be handled like normal household rubbish. Please
recycle where recycle facilities exist. Check with your
local authority or retailer for recycling advice.
Troubleshooting
• If the air compressor does not function, check the battery
and make sure it is charged.
• If the battery does not charge, check the charger adapter
and the charger adapter cable are connected correctly.
Remove the battery pack and allow it to cool down to room
temperature.
• If there is no pressure, check the adapter and make sure it
is well fitted.
• If the pump operated but article does not inflate, make sure
you are using the correct adapter. Clean the adapter and
check if the adapter is well fitted.
Fig. 16
Air hose
storage
Fig. 17
Adapter
storage
area
R
Fig. 18
Carrying
case
Air hose
Battery
Battery
charger
Adapters
Air compressor
