background image

Protection from environmental influences

1. 

Wear suitable work clothes. Wear safety goggles.

2. 

Protect your cordless tool and the battery charger from 

moisture and rain. Moisture and rain can cause dangerous 

cell damage.

3. 

Do not use the cordless tool or the battery charger near 

vapors and flammable liquids.

4. 

Use the battery charger and cordless tools only in dry 

conditions and at an ambient temperature of 41ºF – 105°F 

(5°C – 40.5°C).

5. 

Do not keep the battery charger in places where the 

temperature is liable to reach over 105°F (40.5°C). 

 

In particular, do not leave the battery charger in a car that 

is parked in the sunshine.

6. 

Protect batteries from overheating. Overloads, 

overcharging and exposure to direct sunlight will result 

in overheating and cell damage. Never charge or work 

with batteries that have been overheated – replace them 

immediately, if possible.

7. 

Store the charger and your cordless tool only in dry 

locations with an ambient temperature of 41ºF – 105°F 

(5°C – 40.5°C). Store your lithium-ion battery pack in a 

cool, dry place at a temperature of 77°F (25°C). Protect 

the battery pack, charger and cordless tool from humidity 

and direct sunlight. Only place fully charged batteries in 

storage.

8. 

Prevent the lithium-ion battery pack from freezing. 

 

Battery packs that were stored below 32°F (0°C) for more 

than 60 minutes must be discarded.

9. 

When handling batteries, be wary of electrostatic charge. 

Electrostatic discharges can damage the electronic 

protection system and the battery cells. Avoid electrostatic 

charging and never touch the battery poles.

5

Summary of Contents for sunjoe 24V-CSSHRP-CT-RM





















Reviews: