background image

2

6.  Secure work –

 Use the chain guide lock to secure the 

chain to free both hands for moving the motor head/

grinding wheel. 

Chain Saw Sharpener Use and Care

1.  Do not force the tool – 

It will perform better with less 

likelihood of personal or mechanical injury if it is used at 

the rate for which it was designed.

2.  Use the right product – 

Do not use this machine for any 

job except that for which it is intended.

3.  Check for damaged parts –

 Carefully check that the 

product will operate properly and perform its intended 

function. Replace damaged or worn parts immediately. 

Never operate the product with a damaged part.

4.  Safety switch –

 Do not use a product with a malfunctioning 

switch. Any power tool that cannot be controlled with the 

power switch is dangerous and must be repaired by an 

authorized service representative before using.

5.  Disconnect the tool – 

Turn off the power switch and 

remove the battery when it is not in use, before servicing 

it, when changing accessories and when performing any 

other maintenance task.

6.

 

Store idle tool indoors – 

When not in use, the cordless 

chain saw sharpener should be stored indoors in a dry, 

locked place out of the reach of children. Inspect the tool 

prior to storage and before re-use.

7.  Replacement parts –

 When servicing this unit, use only 

identical replacement parts. Replace or repair damaged 

cord immediately on the charger.

8.  Use recommended accessories –

 Consult page 17 

for recommended accessories. The use of improper 

accessories could cause personal injury or property 

damage. To guarantee the efficiency and consistent 

performance of the machine, replace any worn or broken 

parts with only genuine parts from Snow Joe

®

 + Sun Joe

®

.  

9.  Moving parts –

 Keep hands and feet away from  

moving parts. 

10. Keep guard in place and in good working order –  

Never start the machine without the grinding wheel 

 

guard in place. 

11. Maintain the cordless chain saw sharpener with care 

– 

Follow the applicable maintenance instructions for 

replacing parts and changing accessories. Lubrication is 

not required.

12. Do not stand on the machine – 

Serious injury could 

occur if the tool is tipped or if the cutting edge is 

unintentionally contacted.

13. Never leave tool running unattended – 

Turn off and 

remove the battery. Don’t leave tool until it comes to a 

complete stop.

Service

m

WARNING!

 

Have your power tool serviced by a 

qualified repair person using only identical replacement parts. 

This will ensure that the safety of the power tool is maintained.

1. 

Replace cracked wheel immediately.

2. 

Always use guards and eye shields.

3. 

Do not overtighten the grinding wheel retainer.

4. 

Use only retainers furnished with the chain saw sharpener.

5. 

Frequently clean grinding dust that accumulate under the  

chain saw sharpener.

m

WARNING!

 

Risk of injury due to accidental starting. 

 

Do not use in an area where children may be present.

Specific Safety Rules for Chain 

Saw Sharpener and the Grinding 

Wheel

•  Use only identical replacement grinding wheel. 
•  Keep hands clear from grinding wheel during use. Never try 

to stop the grinding wheel by your hands.

•  Electric shock hazard. Do not expose to rain or use in 

 

damp locations.

•  Do not use for wet grinding.
•  Not for use by or around children.
•  Always keep the hand grips clean and dry.
•  Switch off the machine and disconnect battery pack from 

tool before making any adjustments, changing accessories, 

or storing the tool. Such preventive safety measures reduce 

the risk of starting the tool accidentally.

•  Do not push the On/Off switch any more if the protective 

circuit is triggered. This may damage the battery.

•  Always wear the proper personal protective equipment 

including heavy-duty gloves when handling the wheel.

•  Do not use a wheel that is cracked or chipped.
•  Before starting the machine, make sure the grinding wheel 

is correctly secured and positioned up in rest mode. Do not 

overtighten the wheel mounting retainer. 

•  Always ensure the appropriate wheel guards are installed.
•  Store out of reach of children.

Summary of Contents for sunjoe 24V-CSSHRP-CT-RM





















Reviews: