11
Troubleshooting
m
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center or a similarly qualified
specialist if you cannot solve the problem yourself!
Suspected malfunctions, disturbances or damages are often due to causes that the user can fix themselves. Follow the below
troubleshooting guidelines when checking the unit. In most cases, the problem can be resolved quickly and the screwdriver can
be restored to proper working order.
Tool will not charge.
a) Charger not plugged into
a working outlet.
b) Surrounding air temperature too hot or
too cold.
a) Plug charger into a working outlet.
b) Check to see if receptable is connected
to a light switch which turns power off
when you turn out the lights.
c)
Move charger and tool to a surrounding
air temperature of above 40ºF (4.5ºC) or
below 105ºF (40.5ºC).
Problem
Possible Cause
Solution
