background image

16

5.  Put the new auger in place, and follow the instructions 

above in reverse to replace everything back. 

Proper Care for Bat Charger

m

WARNING!

 To reduce the risk of injury, always unplug 

the charger and remove the battery packs from the charger 

before performing any maintenance task. Never disassemble 

the battery packs or charger. Contact your  

Snow Joe

® 

 + Sun Joe

®

 dealer or the Snow Joe

®

 + Sun Joe

®

 

customer service center for ALL repairs.

1.  To reduce the risk of injury and damage, never immerse 

your battery packs or charger in liquid or allow any liquid 

to flow inside these components.

2.  Clean out dust and debris from charger vents and 

electrical contacts by blowing with compressed air.

3.  Use only mild soap on a damp cloth to clean the battery 

packs and charger, keeping away from all electrical 

contacts. Certain cleaning agents and solvents are 

harmful to plastics and other insulated parts. Some of 

these include gasoline, turpentine, lacquer thinner,  

paint thinner, chlorinated cleaning solvents, ammonia and 

household detergents containing ammonia. Never use 

flammable or combustible solvents around battery packs,  

battery chargers or tools.

4.  The 24V iON+ lithium-ion battery charger has no 

serviceable parts.

Maint Storage

1.  Run the machine a few minutes after throwing snow to 

prevent the auger from freezing.

2.  Examine the cordless snow blower thoroughly for worn, 

loose or damaged parts. Should you need to repair or 

replace a part, contact an authorized Snow Joe

®

 +  

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

 

customer service center at 1-866-SNOWJOE  

(1-866-766-9563) for assistance.

3.  Clean the snow blower before storing or transporting.  

Be sure to secure the unit while transporting.

4.  Remove the batteries from the cordless snow blower 

before storing.

5.  Store the cordless snow blower indoors in a locked,  

dry place out of the reach of children to prevent 

unauthorized use or damage. 

6.  Maintain safety and instruction labels, as necessary.
7.  Always refer to the B Charger Off-Season Storage 

section for important details if the snow thrower is to be 

stored for an extended period.

B Charger Off-Season Storage

1.  Do not expose your battery packs or charger to water, 

rain or allow them to get wet. This could permanently 

damage the charger and the battery packs. Do not use oil 

or solvents to clean or lubricate your battery packs as the 

plastic casing can become brittle and crack, causing a 

serious risk of injury.

2.  Store the battery packs and charger at room temperature 

away from moisture. Do not store in damp locations where 

corrosion of terminals may occur. As with other battery 

pack types, permanent capacity loss can result if the pack 

is stored for long periods of time at high temperatures 

(over 120ºF/49ºC).

3.  24V iON+ lithium-ion battery packs maintain their charge 

during storage longer than other battery pack types. 

As a general practice, it is best to unplug the battery 

charger and remove the battery packs when they are not 

in use. Recharge the battery packs every 6 months to 

50% capacity (2 lights on) during off-season storage to 

maintain optimal battery performance.

Fig. 24

Metal plate

Nut

Fig. 25

Worn auger blade

Axle

Summary of Contents for 24V-X2-20SB-RM

























Reviews: