background image

Lit. No. 70440, Rev. 00 

April 1, 2016

INTRODUCTION

This manual has been prepared to acquaint you with 
the safety information, operation and maintenance of 
your new tailgate spreader. Please read this manual 
carefully and follow all recommendations. This will 
help ensure pro

fi

 table and trouble-free operation of 

your tailgate spreader. Keep this manual accessible. It 
is a handy reference in case minor service is required.

When service is necessary, bring your spreader to 
your distributor. They know your spreader best and are 
interested in your complete satisfaction.

NOTE: This spreader is designed to spread snow 
and ice control materials only. Do not use it 
for purposes other than those speci

fi

 ed in this 

manual.

Warranty Registration

Follow the directions on the SnowEx

®

 Warranty 

Registration and Customer Survey form included in 
the spreader literature kit.

The registration form is also available online at 

www.snowexproducts.com

. Under "Support" select 

"Warranty Registration."

OWNER'S INFORMATION

OWNER'S INFORMATION

Owner's Name:

Owner's Name: ______________________________________________________________________

 ______________________________________________________________________

Date Purchased:

Date Purchased: _____________________________________________________________________

 _____________________________________________________________________

Distributor Name:

Distributor Name:  __________________________________________

 __________________________________________  

Phone:

 Phone: _________________

 _________________

Distributor Address:

Distributor Address: ___________________________________________________________________

 ___________________________________________________________________

Vehicle Model:

Vehicle Model: _____________________________________________

 _____________________________________________ 

Year:

 Year: __________________

 __________________

Spreader Model:

Spreader Model: _________________________

 _________________________ 

Serial #:

 Serial 

#: __________________________________

 __________________________________

Spreader Weight:

Spreader Weight: _____________________

 _____________________lb/kg

lb/kg

Summary of Contents for Bulk Pro 1575

























Reviews: