#56663 SNOW THROWER OPERATOR’S MANUAL 15
MAINTENANCE
WARNING:
Make sure to turn off the switch and disconnect the extension cord
before performing any maintenance task on your Snow Thrower.
Snow Thrower Use and Care
1.
KNOW YOUR LIMITATIONS. Do not overload your Snow Thrower’s capacity by
attempting to clear snow at too fast of a rate.
2.
Use of the Snow Thrower for operations different from intended could result in a danger
situation.
3.
Do not attempt to repair the Snow Thrower unless you have the proper tools and instructions
for disassembly and repair.
4.
Check the bolts at frequent intervals for proper tightness to ensure that the equipment is in
safe working condition.
5.
After each snow removal session, run the Snow Thrower for a few minutes to prevent the
collector/impeller from freezing. Shut off the motor, wait for all revolving parts to stop
completely, and wipe residual ice and snow off the unit. Rotate the chute crank several times
to remove any excess snow.
Lifetime Lubrication
Lubrication is not necessary and may damage the unit. The Snow Thrower is lubricated for
lifetime use at the factory before shipment.
STORAGE
1.
Clean the Snow Thrower of snow and ice buildup before storing or transporting. Be sure to
secure the unit while transporting.
2.
Disconnect the extension cord from the Snow Thrower.
3.
Inspect the extension cord closely for signs of wear or damage. Replace it if it is worn or
damaged.
4.
Inspect the Snow Thrower carefully for worn, loose, or damaged parts. Check connections
and screws and tighten if necessary.
5.
Store the unit, along with the disconnected extension cord, in a locked, dry place out of the
reach of children to prevent unauthorized use or damage. Cover loosely with a tarp for added
protection.
Summary of Contents for 56663
Page 1: ......
Page 16: ...56663 SNOW THROWER OPERATOR S MANUAL 16 EXPLODED VIEW...
