SNOW WOLF QuattroPlow QP-102, Operation & Maintenance Manual

Page: 36 / 96

34
QuattroPlow Operation and Maintenance Manual
Wing Cutting Edge Upgrade Kit
Installation
AVOID SERIOUS INJURY OR DEATH
Securely block up the attachment before
working underneath.
Figure 7
Install the three bolts (Item 1), three washers (Item
2) and three bushings (Item 3)
[Figure 7] into the
cutting edge (Item 4).
Install the three washers (Item 5) (larger / heavy
washers), between the cutting edge and the wing
(Item 6)
[Figure 7] .
Figure 8
Install the cutting edge (Item 4) onto the wing
(Item 6)
[Figure 8] . Secure the cutting edge to the
wing with three washers (Item 7) and three nuts
(Item 8).
Adjust the cutting edge evenly at the desired
height and tighten hardware.
Repeat procedures on the opposite side.
1
4
3
5
6
2
4
6
8
7