Connection Hook
Hang it from the outside
so the tip of the hook
does not rub against the tarp body.
Connect the buckles of the inner roof.
In order to reach the buckle of the tarp body, tilt the wing pole once and connect the buckle of the inner
roof to the inside of the main corner. Connect the buckle to the side where you can see the end of the belt
faces down (2 positions). After connecting, stand up the wing pole and readjust the tension with the
adjustment belt on the inner roof
* Please work by tilting each wing pole. If you point a peg to the lower end of the wing pole, it will serve as
a mark for rebuilding.
* Ensure the roof sheet tape (red/black) and the tape with the connecting buckle (red/black) match in color.
1
Connect each corner of the inner roof.
Hang the hook at each corner of inner roof to the ring at each corner of tarp. (4 positions)
2
7
How to Attach The Inner Roof
The inner roof is made of flame-retardant material, but if not installed incorrectly, it may cause a fire.
Attention
Be careful not to loosen or stretch the inner roof too much. If it is too loose, it will be very dangerous as it
will be close to the bonfire. If it is too tight, the ridgeline of the tarp body will loosen and wrinkles will occur.
Attention
Be careful not to twist the belt with the connection buckle.
Inner Roof
Roof Sheet Tape (Black)
Black Tape
Connection Buckle
Roof Sheet Tape (Red)
Red Tape
Connection Buckle
End of the Belt
End of the Belt
