Snow Peak GigaPower WG STOVE, Instruction Manual, Page: 15 / 23

15
3. The burner flame becomes stabilized 15-20
seconds after lighting the stove. Turn the Light/
cook lever counterclockwise to the COOK
position.
4. Pump 10-20 times to re-pressurize the Fuel Bottle.
Caution: When optimal pressure is achieved, the heat generated will change the color of the
windscreen to red.
5. Carefully place cookware on the center of the stove and use the
flame control to adjust the heat.
Caution: Thin-walled cookware with non-stick coating may become damaged when used with this
stove. Therefore, minimize the heat output of the stove.
Caution: The maximum diameter of cookware to be used with this stove is 230 mm and/or 6 liters
volume. Carefully place cookware on the center of the stove to stabilize. If this guideline is not
observed, the stove may become unstable resulting in damage to the stove, cookware or the
environment.
6. While in operation, monitor the stove for fuel leaks and improper
burning conditions. If a problem is discovered, turn off the stove
immediately. Wait until the stove has completely cooled prior to
performing necessary repair or maintenance.
Caution: The flame will not stabilize if the lever is turned
counterclockwise to the COOK position prior to the initial
stabilization. Confirm that the lever is turned fully counterclockwise
to the COOK position after the stove is burning with a stable
blue flame.
Continuous burning with the lever in the LIGHT position (turned
fully clockwise) will decrease the pressure inside the fuel bottle
leading to a reduced output.