Snorkel AB85J, Repair Parts Manual

Page: 531 / 591

AB85J – 0421900 Maintenance – 9
Frequent Maintenance – Every 90 Days or 150 Hours
Performed by: Date:
Item Procedure Information OK
Daily maintenance
Perform maintenance as per schedule Retain copy of checklist
Preventive inspection
maintenance checklist
Perform inspection, complete form
Retain copy of checklist
Placards and decals
inspection
Inspect using drawing and parts listing in
Section 1 – Repair Parts Manual
Replace any missing or
unreadable decals/placards
Door hinges and latches
Lubricate SAE 10W oil or spray lubricant
Riser cylinder ends
Lubricate
Extreme pressure grease
Above 10° F NLGI Grade 2
Below 10° F NLGI Grade 1
Rotation bearing
Lubricate
Extreme pressure grease
Above 10° F NLGI Grade 2
Below 10° F NLGI Grade 1
Rotation bearing teeth
and pinion
Lubricate
Open gear lubricant
ASTM D 445
Tie rods
Lubricate
Extreme pressure grease
Above 10° F NLGI Grade 2
Below 10° F NLGI Grade 1
Gear hubs
Check fluid level, fill if low
Gear lubricant
SAE grade 80W-90
Swing drive Check fluid level, fill if low
Gear lubricant
SAE grade 80W-90
Platform rotator
Refill if disassembled for repairs
Consult factory
Platform controller
Check smooth operation/speeds
Batteries
Check specific gravity 1.260/1.275 at 80° F (26° C)
Hydraulic return filter Check condition Replace if dirty
Engine rpm Check for proper engine rpm See engine owner’s manual
Engine oil and filter Replace per engine owner’s manual See engine owner’s manual
Engine fuel filter Check condition Replace every 6 months or if dirty