Product Assembly
Display Key and LCD diagram
6 • UK
1. LCD Screen
2.
SET
Key
3. Full Character Display
4. Current Output: 2A
Pressure unit BAR/PSI
Temperature °C only
Included in the box:
LCD Display
Sensor x 4
Opener Tool
(1 pc)
Hex Wrench
(1 pc)
Hex Nut
(1 pc)
Rubber O-Ring
(4 pcs)
ICON
Description
Alarm Status
Sensor Battery Low
1
2
3
4
Installation Instruction
Monitor Display Installation
The LCD display is deigned to utilise the
cigarette lighter adaptor (CLA) power for
a simple installation. Please plug the
display firmly into the cigarette lighter
socket to begin using the STP 1400.
Setting the parameters
Pressure Unit Selection
Selection of pressure unit (PSI or Bar) can be done by user, details as below:
With the vehicle stationary and the STP1400 connected to the cigarette lighter socket.
Press an hold the
SET
button for 3 seconds to enter the setup mode, the unit will
emit a beep and either Bar or PSI will begin to flash – to change from Bar and PSI or
visa versa press the
SET
button.
Once you have selected the unit of pressure press and hold the
SET
button for
two seconds to save and exit the set up or move on to setting the upper and lower
pressure alarms – refer to
High/Low Pressure Alarm Level Setting
press the
SET
button for 1 second..
If the
SET
button is not pressed for two minutes the unit will automatically exit the
setup mode.
7 • UK
Position
User tip: The STP 1400 is designed to be an aid to safe driving, please do
not become distracted by the STP1400 whilst driving.
Flashing
Bar
PSI
