Tip: The default route options are set to Quickest Route.
To change the route options refer to Section 6 in this user
manual
.
4.
Press
and Snooper will calculate the
fastest route from your current position to your destination.
This should only take a short time and a progress bar is
shown on the screen.
* If you are using a Truckmate or Ventura
an additional screen will be displayed
where you can ‘
choose your vehicle
’.
(see page 24 for details)
5.
A journey summary screen will then be
displayed
Please note: The summary screen is only
displayed for approximately 10 seconds
before the unit automatically begins to
provide you with turn-by-turn instructions.
6.
Press
The navigation view will now be displayed, but with the
route now highlighted for you. As you appr
oach a specific
turn in the calculated route, Snooper will advise you what
to do. For example, “After 200 yards, turn left”, followed
by “Now turn left”. As you proceed along your journey,
following the voice instructions, you will notice that the
navigation view is updated constantly, always showing
approaching roads and junctions and presenting the best
route to you.
Tip: If you miss a turn or drive down the wrong road, a
new fastest route will be calculated automatically, based
on your new position and direction of travel, a tone will
be heard to confirm re-routing. Snooper will always give
you clear instructions that will take you to your chosen
destination.
Final Destination
Estimated arrival time
Your current location
Distance to destination
Estimated journey time
Refer to section 6 on page 76 for details
6 of 10
QSG EN v1.1 11/19
