background image

7

Compliance

FCC part 15

This device complies with Part 15 of the FCC rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may 

cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated 

in a commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the 

user will be required to correct the interference at the user’s expense.

Privacy of communications may not be ensured when using this phone.

Warning: Changes or modifications to this equipment not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment.

Caution: To maintain the compliance with the FCC’s RF exposure guideline, place the 

base unit at least 20 cm from nearby persons.

For body-worn operation, this handset has been tested and meets the FCC RF exposure 

guidelines when used with the accessories supplied or designated for this product. Use of 

other accessories may not ensure compliance with FCC RF exposure guidelines.

Industry Canada

This Class A digital apparatus complies with Canadian requirements: 

 

CAN ICES-3 (A)/NMB-3(A). Cet appareil numérique de la classe A est conforme à la 

norme CAN ICES-3 (A)/NMB-3(A) du Canada.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with 

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1) this device may not cause 

interference, and (2) this device must accept any interference, including interference 

that may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.

The term ‘’IC:‘’ before the certification/registration number only signifies that the 

Industry Canada technical specifications were met.

This product meets the applicable Innovation, Science and Economic Development 

Canada technical specifications.

Summary of Contents for M100 KLE

















Reviews: