Snom M100 KLE, Administrator And Provisioning Manual, Page: 98 / 190

Using the WebUI 98
Back to Contents
M100 KLE Administrator and Provisioning Manual
Setting Description
Mode Sets which files for which the M100 KLE checks. It can
check for configuration files, firmware update files (from the
URL entered on the Firmware Server Settings page), or
both.
Note : When checking for both configuration and firmware
files, the firmware URL can be within the config file. This
firmware URL takes take precedence over the URL on the
Firmware Server Settings page. It will also update the URL
on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Bootup Check Sets the M100 KLE to check the provisioning URL for new
configuration and/or firmware files upon bootup. The
update is applied as part of the reboot process.
Schedule Check: Disable When selected, disables regularly scheduled file checking.
Schedule Check: Interval Sets an interval for checking for updates. After selecting
Interval, enter the interval in minutes between update
checks.
Schedule Check:
Days of the Week
Select to enable weekly checking for updates on one or
more days. After selecting Days of the Week, select the
day(s) on which the M100 KLE checks for updates.
Start Hour Select the hour of the day on which the M100 KLE checks
for updates.
End Hour Select the hour of the day on which the M100 KLE stops
checking for updates.
Use encryption for
configuration file Enables an AES-encrypted configuration file to be
decrypted before being applied to the M100 KLE. Select if
the configuration file has been secured using AES
encryption. See
“Securing configuration files with AES
encryption” on page 115
.
Passphrase If the configuration file has been secured using AES
encryption, enter the 16-bit key. See
“Securing
configuration files with AES encryption” on page 115
.