manualshive.com logo in svg

Snom M100 KLE, Administrator And Provisioning Manual, Page: 128 / 190

Share
Download
Snom M100 KLE Administrator And Provisioning Manual Download Page 128

Configuration File Parameter Guide

128

Back to Contents

M100 KLE Administrator and Provisioning Manual

Setting:

sip_account.dirty_host_ttl

Description:

Specify the “Time to Live” (TTL) for dirty hosts in seconds. This means 
that, when a phone was unable to reach a host, the phone will not try to 
reach this host again until the time specified in this field has elapsed.
If this setting is 0 or empty, it has no effect (the host is set as "dirty" but 
only for 0 seconds, which means it will have no effect on future requests)

Values:

0-7200

Default:

0

Setting:

sip_account.dns_query_option

Description:

Select DNS query option for SIP traffic only:  
0 (DNS query with A record only) 
1 (DNS query with NAPTR/SRV/A)

DNS query for all other traffic (e.g. HTTP) should always perform 

 

A record only.

Values:

0, 1

Default:

1

Setting:

sip_account.shared_local_sip_port_enable

Description:

Allow the same SIP local port for multiple accounts.
If enabled, the SIP local port defined in parameter 

sip_account.shared_local_sip_port

 will be used instead of the SIP 

local ports defined for the accounts, parameter: 

sip_account.x.local_sip_port

.

Values:

0 (disabled), 1 (enabled)

Default:

0

Setting:

sip_account.shared_local_sip_port

Description:

Defines the local SIP port to be used by all accounts, if enabled by 
parameter 

sip_account.shared_local_sip_port_enable

.

Values:

1-65535

Default:

5060

Summary of Contents for M100 KLE































































































































































































Reviews:

No comments