Snom M100 KLE Administrator And Provisioning Manual Download Page 50

Page: 50 / 190

Using the WebUI

Back to Contents

M100 KLE Administrator and Provisioning Manual

Music on Hold Settings

Network Conference Settings

Session Timer

Server Address

Enter the STUN server IP address or domain name.

Port

Enter the STUN server port.

Enable STUN
Keep-Alive

Enables or disables UDP keep-alives. Keep-alive packets
are used to maintain connections established through NAT.

Keep-Alive Interval
(secs)

Enter the interval (in seconds) for sending UDP keep-alives.

Setting

Description

Enable Local MoH

Enables or disables a hold-reminder tone that the user
hears when a far-end caller puts the call on hold.

Setting

Description

Enable Network
Conference

Enables or disables network conferencing for account x.

Conference URI

Enter the URI for the network bridge for conference
handling on account x.

Setting

Description

Enable Session Timer

Enables or disables the SIP session timer. The session
timer allows a periodic refreshing of a SIP session using
the RE-INVITE message.

Minimum Value (secs)

Sets the session timer minimum value (in seconds) for
account x.

Setting

Description

Summary of Contents for M100 KLE































































































































































































Search results

Summary of Contents for M100 KLE

Reviews:

Snom M100 KLE, Administrator And Provisioning Manual, Page: 50 / 190

Search results

Summary of Contents for M100 KLE

Reviews: