Snom M10 KLE User Manual Download Page 22

Page: 22 / 76

Locating the Handset

You can find handsets by paging them from the base station. Press the

HANDSET LOCATOR

(page) button on the base station to ring all handsets:

Hwang Jin wook | 09. Jan. 2019 | Revision 1.0

Silkscreen artwork | M100 Base

6,/(1&(

6723

3DJLQJ

• All handsets within range of the base will ring for one minute, even if the

volume is off.

• To end the locator page, press

END

• To silence the locator page on one handset only, press

MUTE

Screen icons

The following screen icons indicate your phone’s current status:

Icon

Status

Indicates signal strength, from one bar (weak) to four bars (strong) Flashes

when out of range

Indicates battery strength from 1/3 to 3/3 Flashes when empty

Indicates the currently displayed call is on hold with your handset

This icon is visible when displaying the Call List

The ringer is off.

Headset—audio is coming through a headset after the

HEADSET

key was

pressed

Speakerphone—the speakerphone is active

Microphone is muted

Summary of Contents for M10 KLE












































































Search results

Summary of Contents for M10 KLE

Reviews:

Snom M10 KLE, User Manual, Page: 22 / 76

Search results

Summary of Contents for M10 KLE

Reviews: