8
Connect power to the conference phone
1�
Plug the DC 12V 3A round jack end of the power adapter into the power jack on the
back of the charging dock�
2� Plug the large end of the power adapter into a wall outlet not controlled by a
switch�
3� Place the rear connectors of the conference phone into the charging dock�
•
The supplied DC 12V 3A round jack power adapter is designed for use only
with the C620 conference phone� It is not designed to power other devices�
Do not connect the supplied DC 12V 3A round jack power adapter to any other
devices�
•
The DC 12V 3A round jack power adapter is intended to be correctly oriented in
a vertical or floor mount position� The prongs are not designed to hold the plug
in place if it is plugged into a ceiling, under-the-table, or cabinet outlet�
Register the conference phone to the base
Your conference phone is pre-registered to the base station� If you need to manually
re-register the conference phone, follow these steps:
1�
Place the conference phone in the charging dock, and make sure it is connected to
power�
2� If the conference phone is displaying
go to step 6�
3� If the conference phone is displaying
go to step 7�
4� If the conference phone is displaying
go
to
step
8�
5� If the conference phone is displaying
go to step 7�