Installation Guide
7
1. Introduction
The Integrated High Speed Dome Camera is designed to deliver superb
performance and durability with an intelligent and stylish housing that is
suitable in any security and surveillance installation. In addition, the Dome
Camera supports one cabling for easy installation. Large set of built-in
protocols, including DSCP, Pelco, VCL, Philips, AD-422 (Manchester), etc.,
provide connectivity to other suppliers’ surveillance systems.
General Operation Requirements:
A minimum of one control device is required for operation, such as a control
keyboard, a DVR or a PC. The Integrated High Speed Dome Camera
contains a built-in receiver that decodes commands originating from a control
device.
Connect Dome Cameras to other devices, as shown in the diagram below, to
complete a video surveillance system.
NOTE: To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater at the mid-point of the network. However, a repeater may be needed
in the network distance less than 1.2 km if the used cables are not the CAT 5,
24-gauge cables; also see
3.2.4 RS-485 Connector Definition
.
Refer to the
repeater’s manual for detailed information.