Installation Guide
15
3.2
Cables and Connections
The Dome Camera is supplied with one integrated 22-pin Data Cable for
connecting with the power, video, and RS-485/audio input & audio output
cables. Please read the following sections thoroughly before making
connections.
3.2.1 Cable
Requirements
For operation, the Integrated High Speed Dome Cameras require video,
RS-485 and power cables as described below:
•
The video cable sends video signals to a remote viewing site. Using a
coaxial BNC cable to send video signals is recommended.
•
RS-485 cable carries commands from a control device to the analog
Dome Cameras. A CAT 5, 24 gauge cable is recommended.
•
Power supply: DC 12V/AC 24V output voltage
NOTE: Ensure power supply meets the Dome Camera’s power
requirement, or product impairment will occur. If any mistake happens,
please contact with a qualified maintenance engineer.
3.2.2
22-Pin Data Cable
The analog and network Speed Dome Cameras’ Data Cables are illustrated
as follows.
Analog
Model
The analog Dome Camera’s Data Cables are illustrated as shown below.
DC 12V Data Cable