manualshive.com logo in svg

Snell VEGA-16MV, User Manual, Page: 120 / 260

Share
Download
Snell VEGA-16MV User Manual Download Page 120

Vega-MV Router Multiviewer - User Manual  

Issue 1 Revision 2

Page 120

© 2017 SAM

   

Object Menu 

Web Interface  7.6 

7.6.1 Edit Object Window

The Edit Object menu is used to set up all the attributes of a tile. It can be opened using two 
methods:

•

Double-click on the object to edit.

•

Go to the Object menu and select 

Edit Object

 or 

New Object

.

The Edit Object menu comprises the following tabs: 

Type

 - see Section 7.6.2 "Edit Object - Type" on page 121.

Border

 - see Section 7.6.3 "Edit Object - Border" on page 122.

Parent

 - see Section 7.6.4 "Edit Object - Parent" on page 122.

Properties 

- see:

•

Section 7.6.5 "Edit Object - Properties" on page 123.

•

Section 7.6.6 "Edit Object - Properties, Source (Video or Audio object)" on page 124.

•

Section 7.6.7 "Edit Object - Properties, Audio (Video or Audio object)" on page 126.

•

Section 7.6.8 "Edit Object - Properties, Error (Video or Audio object)" on page 132.

•

Section 7.6.9 "Edit Object - Properties, Tally (Video object)" on page 133.

•

Section 7.6.10 "Edit Object - Properties, VBI (Video object)" on page 134.

•

Section 7.6.11 "Edit Object - Properties, WSS (Video object)" on page 136.

•

Section 7.6.12 "Edit Object - Properties, SAG - Safe Area - (Video Object)" on page 
137.

•

Section 7.6.13 "Edit Object - Properties, Text (Text object)" on page 138.

•

Section 7.6.14 "Edit Object - Properties, Logo Tab (Logo object)" on page 139.

•

Section 7.6.15 "Edit Object - Properties, Clock (Clock object)" on page 140.

•

Section 7.6.16 "Edit Object - Properties, Timer (Timer Object)" on page 141.

UMD

 - see Section 7.6.17 "Edit Object - UMD Tab" on page 146.

Some controls, such as ‘Properties’, depend on the type of tile object and can have sub-tabs. 

Summary of Contents for VEGA-16MV





































































































































































































































































Reviews:

No comments